E-Sniffer Hydrogen Sulphide Detector (MOS, 100 PPM)

Hythane, developed gas detection, to safeguards people, property, and the planet from dangerous gas leaks. Drawing on Hythane's world-class sensor technology, we provide solutions that foster safer, more secure, and productive spaces. The e-Sniffer gas detector is a micro-controller-based transmitter designed for use with Hythane's Metal Oxide Semiconductor (MOS), Catalytic and Electrochemical sensor. It is designed to detect gases in parts per million (ppm) and volume percent levels and provide status indication and alarm outputs. e-Sniffer provides a 4-20 mA signal which is proportional to 0-100% of the detection range at the sensor. In addition, the e-Sniffer includes warning, alarm and fault relay contacts that can be used to indicate an alarm or fault condition. The e-Sniffer includes a three (3) digit LED display. This local digital display continuously indicates gas concentrations during normal operation and in the calibration mode, display codes during the setup mode and fault codes. e-Sniffer has four different operating modes. First, the normal operating mode in which alarms are active, and the display and 4-20 mA readings are proportional to the gas concentration at the sensor. Second, the gas check mode that allows the user to apply gas and check the sensor response while alarm outputs are inhibited. Third, a calibration mode in which gas is applied to the sensor to calibrate the unit. Finally, a set-up mode which allows the user to review or change setup options such as sensor range. Selecting Setup Mode on e-Sniffer is accomplished by using the magnetic wand/ key.